• Products
  • Solutions
  • Support
  • Newsroom
Download
Tools
How To
search search close
Products
LED Displays
Interactive Flat Panel Displays
Digital Signage
Solutions
Shopping Mall
Enterprise
back
Back
image
image
image

Video Wall Controller Casing

  • Hardware Structure
  • Adopts the 8 U standard rack design and operational-grade ATA chassis system.
  • Adopts redundant power supply design, 6 intelligent fans for auto temperature adjustment, and 2 main control boards for expansion.
  • Adopts the plug-in modular design and 11 slots for hot swappable service boards (11 slots for input and output boards).
  • Adopts the 4.3-inch non-touch screen panel to allow you to view the device status information at any time.
  • Provides the indicator lights to allow you to view the device online status and operating status.
  • Audio and Video Input
  • Supports the video signal source input such as computers, video conference terminals, and ultra-high-definition (UHD) servers. Supports VGA, DVI, HDMI, 4K HDMI, and 4K DP signal input, and network signal source input such as network cameras and NVRs.
  • Supports composite audio input and independent audio input. The audio input supports 16 bit, 48K Hz sampling, and dual channel.
  • Supports YUV 444 in image collection and output with lossless image quality.
  • Support ultra-high-definition fusion and up to sixteen 4K UHD signal access.
  • Supports OSD on the input.
  • Supports input image clipping to cut the black edge of the input image.
  • Audio and Video Output
  • Supports DVI, HDMI, and 4K HDMI video signal output and the video signal output via network ports.
  • Supports composite audio output and independent audio output.
  • Adopts frame synchronization technology to ensure that the images of all output ports are completely synchronized to provide complete picture and smooth playback without stuttering, frame loss, tearing, or seams.
  • Supports using the installed decoding board to decode the signal sources of network cameras and NVRs.
  • Video Decoding
  • Supports using the installed decoding board to decode the signal sources of network cameras and NVRs.
  • Supports main stream encoding, sub stream decoding, auto-switching to sub stream, and decoding exception prompt.
  • Supports up to 256 decoding channels, and simultaneous decoding of 128 channels of 2 MP video to the video wall when the device is fully installed with service boards.
  • Supports the mainstream decoding formats such as H.264, H.265, Smart264, Smart265, and MJPEG, and mainstream encapsulation formats such as PS, TS, ES, RTP, and HIK.
  • Support 16 MP HD video decoding.
  • Video Wall Function
  • Supports any large screen splicing of 88 screens when the device is fully installed with service boards.
  • Supports window opening and floating windows.
  • Support up to eight 4K signal source windows per screen and each signal source window can be divided into 1, 4, 6, 8, 9, and 16 windows.
  • Supports displaying the image of a video wall on the connected screen(s) or previewing the image of a video wall on a client.
  • Supports 8 background images. The resolution of each background image is 8K.
  • Supports 8 video walls. Each video wall allows one background image.
  • Supports up to 12 subtitles for the device, up to 3 subtitles for one video wall and configuration of different types of subtitles.
  • Supports up to 128 scenes. You can customize the video wall layout and save it as a scene.
  • Supports the auto-switching of up to 100 view groups via the HCP client. Supports auto-switching on a single window, on some windows, and on all windows. You can save all auto-switch resources in the scenes and customize the location, scene, and time in each view group.
  • Supports double-clicking the sub-window to enlarge its window size and double-clicking the sub-window again to restore its original window size.
  • Supports using the HCP client to capture images on the screen and display the captured images on the video wall when the decoding board is installed in the device.
  • Supports the live view of network signal sources over RTP or RTSP.
  • Device Access and Control
  • Supports using the network keyboard or serial port keyboard to control the device, and to realize sub-window changing, group operation and auto-switching, scene changing, PTZ control, and video wall playback.
  • Supports using the ONVIF protocol to access the network source devices for decoding.
  • Supports using the software to control LCD screens, including screen switch, screen signal source changing, and the adjustment on brightness, contrast, color, sharpness, picture horizontal position, and picture vertical position.
  • Supports using the software to control LED screens, including screen switch and screen signal source changing.
  • Supports PTZ control and movement of the cameras.
  • Maintenance Support
  • Supports the access and operation via the control client and web client. The web browser should be IE 8, Chrome 45 and above.
  • Supports the access and operation via the mobile client (Android or iOS).
  • Supports NAT.
  • Supports obtaining and configuring parameters remotely, importing parameters remotely, and exporting parameters remotely.
  • Supports obtaining system running status and system logs remotely
  • Supports restarting the device remotely, restoring the default settings, and upgrading the device.
  • Supports auto detection and alarm for failures and the device exception alarm function when the boards are online, including network disconnection, IP conflict, invalid access, temperature threshold exceeding, and fan exception.
  • Supports user permission management. Different users are assigned with different permissions to use the specified resources and operate the specified video wall modules.
  • Supports manual time sync or NTP time sync.
View Less
View more
Data Sheet
Sales Inquiry

Available models:

DS-C30S-S23(V2)
DS-C30S-S23
Data Sheet

Specification

  • Chassis
  • Chassis Height8 U
  • Bus Type10 GB network switching
  • Signal Sampling QualityYUV 444
  • Main Control Board Slot2
  • Installed Main Control Boards1
  • Service Board Slot23
  • Max. Input Slot22
  • Max. Output Slot22
  • Mixed Installation of Service BoardsSupported
  • Power Supply Slot3
  • Installed Power Supplies2
  • Fan6
  • Device Decoding CapabilityUp to 8 decoding boards. Supports 128 channels of 1080p 30 fps and simultaneously decoding of 256 channels of network videos to the video wall.
  • Device Splicing Capability88 channels
  • Dual Device Hot BackupSupported
  • Interface
  • USB Interface No.2 × USB 2.0
  • Serial Interface2 × Console port (RJ-45) + 1 × RS-485/RS-232 multiplex interface (RJ-45, baud rate:115200, valid data bit: 8 bit)
  • Screen Type4.3 inch non-touch screen, length × width: 105.42 mm × 67.07 mm (4.15 inch × 2.64 inch), resolution: 480 × 272
  • Power
  • Power Interface100 VAC to 240 VAC, 50/60 Hz
  • Environment
  • Working Temperature0 °C ~ 50 °C
  • Working Humidity10 ~ 90% (non-condensing)
  • Network
  • Management Network Port2 × 10/100/1000 Mbps auto-sensing Ethernet interface (2 network ports on the switching board and 1 network port reserved on the main control board)
  • Transmission ProtocolSDK, RTSP, ONVIF
  • Video Wall
  • Video Walls8
  • Video Wall Scale88
  • Split WindowSupported
  • Open Windows16
  • Window Division per Screen1, 4, 6, 8, 9, 16
  • Input Source Copy CapabilityEach output board can duplicate eight 2K images from the input source but the LED controller board does not have copy capability.
  • Layers Per Screen8 × 1080p layers or 4 × 4K layers
  • Layers per Device512 (fully installed with the output boards)
  • Scenes128
  • Scene Auto-Switch Delay400 ms
  • Plans128
  • Preview Resolution16-channel D1 or 32-channel CIF; 4-channel D1 or 16-channel CIF when previewing the image of a video wall on a client with all service boards installed in the device
  • UHD Fusions≤ 16
  • Background ImageTotal: 8; One background image on each video wall. Resolution: 16382 × 8192 Format: JGP, JPEG
  • SubtitlesTotal: ≤ 12; Single video wall: ≤ 3
  • Input OSDSupported
  • Input Image ClippingSupported 200 pixel points on top, bottom, left, and right.
  • Local Signal Source Decoding Delay50 ms
  • Network Signal Source Decoding Delay200 ms
  • Signal Source Live ViewSupported
  • General
  • Net Weight≤ 57.54 kg (126.87 lb.) Full configuration, including 31.14 kg (68.65 lb.) chassis and 1.05 kg (2.31 lb.) for each service board
  • Gross Weight≤ 105.81 kg (233.48 lb.) Full configuration, including 59.35 kg (130.88 lb.) chassis and 2.02 kg (4.45 lb.) for each service board
  • Dimensions (W × H × D)442 mm × 354.8 mm × 447 mm (17.4 inch × 13.97 inch × 17.59 inch)
  • Packing List1 × grounding cable, 1 × audio adapter cable, 1 × serial port cable, 1 × AC power cord, 2 × power supply, 1 × regulatory compliance and safety information manual
  • Power Consumption≤ 1000 W (full configuration)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Specification

Chassis
Chassis Height
8 U
Bus Type
10 GB network switching
Signal Sampling Quality
YUV 444
Main Control Board Slot
2
Installed Main Control Boards
1
Service Board Slot
23
Max. Input Slot
22
Max. Output Slot
22
Mixed Installation of Service Boards
Supported
Power Supply Slot
3
Installed Power Supplies
2
Fan
6
Device Decoding Capability
Up to 8 decoding boards. Supports 128 channels of 1080p 30 fps and simultaneously decoding of 256 channels of network videos to the video wall.
Device Splicing Capability
88 channels
Dual Device Hot Backup
Supported
Interface
USB Interface No.
2 × USB 2.0
Serial Interface
2 × Console port (RJ-45) + 1 × RS-485/RS-232 multiplex interface (RJ-45, baud rate:115200, valid data bit: 8 bit)
Screen Type
4.3 inch non-touch screen, length × width: 105.42 mm × 67.07 mm (4.15 inch × 2.64 inch), resolution: 480 × 272
Power
Power Interface
100 VAC to 240 VAC, 50/60 Hz
Environment
Working Temperature
0 °C ~ 50 °C
Working Humidity
10 ~ 90% (non-condensing)
Network
Management Network Port
2 × 10/100/1000 Mbps auto-sensing Ethernet interface (2 network ports on the switching board and 1 network port reserved on the main control board)
Transmission Protocol
SDK, RTSP, ONVIF
Video Wall
Video Walls
8
Video Wall Scale
88
Split Window
Supported
Open Windows
16
Window Division per Screen
1, 4, 6, 8, 9, 16
Input Source Copy Capability
Each output board can duplicate eight 2K images from the input source but the LED controller board does not have copy capability.
Layers Per Screen
8 × 1080p layers or 4 × 4K layers
Layers per Device
512 (fully installed with the output boards)
Scenes
128
Scene Auto-Switch Delay
400 ms
Plans
128
Preview Resolution
16-channel D1 or 32-channel CIF; 4-channel D1 or 16-channel CIF when previewing the image of a video wall on a client with all service boards installed in the device
UHD Fusions
≤ 16
Background Image
Total: 8; One background image on each video wall. Resolution: 16382 × 8192 Format: JGP, JPEG
Subtitles
Total: ≤ 12; Single video wall: ≤ 3
Input OSD
Supported
Input Image Clipping
Supported 200 pixel points on top, bottom, left, and right.
Local Signal Source Decoding Delay
50 ms
Network Signal Source Decoding Delay
200 ms
Signal Source Live View
Supported
General
Net Weight
≤ 57.54 kg (126.87 lb.) Full configuration, including 31.14 kg (68.65 lb.) chassis and 1.05 kg (2.31 lb.) for each service board
Gross Weight
≤ 105.81 kg (233.48 lb.) Full configuration, including 59.35 kg (130.88 lb.) chassis and 2.02 kg (4.45 lb.) for each service board
Dimensions (W × H × D)
442 mm × 354.8 mm × 447 mm (17.4 inch × 13.97 inch × 17.59 inch)
Packing List
1 × grounding cable, 1 × audio adapter cable, 1 × serial port cable, 1 × AC power cord, 2 × power supply, 1 × regulatory compliance and safety information manual
Power Consumption
≤ 1000 W (full configuration)
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Specification
Chassis
  • Chassis Height8 U
  • Bus Type10 GB network switching
  • Signal Sampling QualityYUV 444
  • Main Control Board Slot2
  • Installed Main Control Boards1
  • Service Board Slot23
  • Max. Input Slot22
  • Max. Output Slot22
  • Mixed Installation of Service BoardsSupported
  • Power Supply Slot3
  • Installed Power Supplies2
  • Fan6
  • Device Decoding CapabilityUp to 8 decoding boards. Supports 128 channels of 1080p 30 fps and simultaneously decoding of 256 channels of network videos to the video wall.
  • Device Splicing Capability88 channels
  • Dual Device Hot BackupSupported
Interface
  • USB Interface No.2 × USB 2.0
  • Serial Interface2 × Console port (RJ-45) + 1 × RS-485/RS-232 multiplex interface (RJ-45, baud rate:115200, valid data bit: 8 bit)
  • Screen Type4.3 inch non-touch screen, length × width: 105.42 mm × 67.07 mm (4.15 inch × 2.64 inch), resolution: 480 × 272
Power
  • Power Interface100 VAC to 240 VAC, 50/60 Hz
Environment
  • Working Temperature0 °C ~ 50 °C
  • Working Humidity10 ~ 90% (non-condensing)
Network
  • Management Network Port2 × 10/100/1000 Mbps auto-sensing Ethernet interface (2 network ports on the switching board and 1 network port reserved on the main control board)
  • Transmission ProtocolSDK, RTSP, ONVIF
Video Wall
  • Video Walls8
  • Video Wall Scale88
  • Split WindowSupported
  • Open Windows16
  • Window Division per Screen1, 4, 6, 8, 9, 16
  • Input Source Copy CapabilityEach output board can duplicate eight 2K images from the input source but the LED controller board does not have copy capability.
  • Layers Per Screen8 × 1080p layers or 4 × 4K layers
  • Layers per Device512 (fully installed with the output boards)
  • Scenes128
  • Scene Auto-Switch Delay400 ms
  • Plans128
  • Preview Resolution16-channel D1 or 32-channel CIF; 4-channel D1 or 16-channel CIF when previewing the image of a video wall on a client with all service boards installed in the device
  • UHD Fusions≤ 16
  • Background ImageTotal: 8; One background image on each video wall. Resolution: 16382 × 8192 Format: JGP, JPEG
  • SubtitlesTotal: ≤ 12; Single video wall: ≤ 3
  • Input OSDSupported
  • Input Image ClippingSupported 200 pixel points on top, bottom, left, and right.
  • Local Signal Source Decoding Delay50 ms
  • Network Signal Source Decoding Delay200 ms
  • Signal Source Live ViewSupported
General
  • Net Weight≤ 57.54 kg (126.87 lb.) Full configuration, including 31.14 kg (68.65 lb.) chassis and 1.05 kg (2.31 lb.) for each service board
  • Gross Weight≤ 105.81 kg (233.48 lb.) Full configuration, including 59.35 kg (130.88 lb.) chassis and 2.02 kg (4.45 lb.) for each service board
  • Dimensions (W × H × D)442 mm × 354.8 mm × 447 mm (17.4 inch × 13.97 inch × 17.59 inch)
  • Packing List1 × grounding cable, 1 × audio adapter cable, 1 × serial port cable, 1 × AC power cord, 2 × power supply, 1 × regulatory compliance and safety information manual
  • Power Consumption≤ 1000 W (full configuration)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

For better user experience, we highly recommend you to update your device to the latest firmware asap.
Firmware_V2.0.5_241008
Applied to:
DS-C30S-S23(V2)

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics / show you targeted advertising / show you advertising on the basis of your location / tailor our website's content. For more information on cookie practices please refer to our cookie policy.

Manage cookies Accept All
Accept All Manage cookies
Contact Sales
Technical Support
Online Service
Subscribe Newsletter
Contact Us

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.